Lumbar support, driver's side, passenger's side

The pneumatic lumbar support can be used to adjust the contour of the backrest on an individual basis.

Brief description of components

Seat module driver's side/passenger's side

Depending on equipment, the seats are equipped with different seat modules. Two module sizes are used:

• Module with 10-chamber plug connection
  
• Module with 8-chamber plug connection
  

In the case of seats with an adjustable lumbar support, the module with 10-chamber plug connection is used.

The seat module is fitted in the corresponding seat.

The seat modules are linked across the K CAN PERIPHERALS data bus to the control modules of the body area.

Control panel module, center console (BZM)

The center console switch center control module is

• the interface from the K CAN SYSTEM data bus to the control modules of the body area,
  
• the interface to the seat switches and
  
• the interface to the controller (CON).
  

The control module center console switch center is fitted in the front center armrest.

Operating switch driver's seat/passenger's seat

Depending on the equipment, various switch blocks are fitted.

The switch blocks are connected by means of ribbon cables to the center console switch center (BZM).

Lumbar support

A lumbar support consists of the following components fitted in each backrest:

• 2 inflatable cushions
  
• 4 solenoid valves
  
• 1 air pump
  

Main functions

Lumbar support adjustment

The lumbar support adjustment is achieved by the varying inflation of 2 cushions in the backrest. The 2 cushions are inflated or deflated via 2 solenoid valves in each cushion. The air pressure required to inflate the 2 cushions is supplied by the air pump.

The air pump and solenoid valves are activated by the relevant seat module in such a way that the required contour is set up with the desired hardness.

The desired lumbar support setting can be chosen via the operating switch.

• The adjustment request is transferred from the switch block across a ribbon cable to the center console switch center (BZM).
  
• The center console switch center (BZM) makes the message available to the Car Access System (CAS) across the K CAN SYSTEM data bus.
  
• The Car Access System (CAS) is the ”gateway control module” and it forwards the message across the K CAN PERIPHERALS data bus to the corresponding seat module.
  
• The seat module activates the corresponding solenoid valve via its output stages and, if applicable, the air pump.